1. IS 15391
Cold Rolled Non-Oriented Electrical Steel Sheet and Strip - Semi-Processed Type
冷軋無取向電工鋼板和鋼帶-半加工型
2. IS 3024
Grain orinted electrical steel sheets and strips
晶粒取向電工鋼板和鋼帶
3. IS 2062
Hot Rolled Medium and High Tensile Structural Steel
熱軋中高強度結構鋼
4. IS 649
Methods for testing steel sheets for magnetic circuits of power electrical apparatus
測試電力電器設備鋼板磁路方法
5. IS 11513
Hot-rolled carbon steel strip for cold rolling purposes specification
熱軋?zhí)间搸в糜诶滠堄猛疽?guī)格
6. IS 2830
Carbon steel cast billet ingots,billets,blooms and slabs for re-rolling into steel for general structural purposes – Specification
碳鋼鑄件坯錠，坯料，印花和厚片復壓成一般結構鋼材用途-規格
7. IS 648
Cold rolled non-oriented electrical steel sheet and strip - Fully processed type
冷軋無取向電工鋼板和鋼帶-整加工型
8. IS 2831
Carbon Steel Cast Billet Ignots, Billets, Blooms and Slabs for Re-rolling into Low Tensile Structural Steel
碳鋼鑄件坯錠，坯料，印花和厚片復壓成低強度結構鋼材
9. IS 277
Galvanized Steel Sheets (Plain and Corrugated)
鍍鋅鋼板（平整型和波紋型）
10. IS 2041
Steel Plates for Pressure Vessels Used at Moderate and Low Temperature
中低溫使用的壓力容器鋼板
11. IS 8329
Centrifugally Cast (Spun) Ductile Iron Pressure Pipes for Water, Gas and Sewage
用于水，氣體和污水流通的離心澆鑄（旋轉）球墨鑄鐵壓力管道
12. IS 429
Methods for testing weight and uniformity of coatings on galvanized iron and steel wires and steel sheets
測試鍍鋅鋼鐵，鐵絲和鋼板重量和涂料均勻度的方法
13. IS 513
Cold reduced low carbon steel sheets and strips
低碳冷軋鋼板和鋼帶
14. IS 1079
Hot Rolled Carbon Steel Sheet and Strip
熱軋?zhí)妓劁摪搴弯搸?span lang="EN-US">
15. IS 1663
Method for tensile testing of steel sheet and strip of thickness 0.5 mm to 3 mm
厚度為0.5mm-3mm的鋼板和鋼帶的拉伸試驗方法
16. IS 1663 PART 2（第二部分）
Tensile testing of steel sheet and strip: Part 2 Steel, sheet and strip of thickness above 3 mm
鋼板鋼帶拉伸試驗：第二部分 厚度超過3mm的鋼板鋼帶
17. IS 1692
Method for simple bend testing of steel sheet and strip less than 3 mm thick
厚度小于3mm的鋼板鋼帶的簡單彎曲試驗方法
18. IS 1756
Methods of modified Erichsen cupping test for steel sheet and strip
鋼板鋼帶改良德國儀立信杯突試驗方法
19. IS 2314
Steel Sheet Piling Sections
鋼板樁截面
20. IS 2385
卷型熱軋低碳鋼板和鋼帶變?yōu)槔滠堝冨a鋼板和冷軋黑鋼板
21. IS 3747
Hot rolled steel plates and sheets for flanging and pressing
鑲邊和壓制的熱軋厚鋼板和薄鋼板
22. IS 3972 PART 1: SEC 1
Methods of test for vitreous enamelware: Part 1 Production of specimens for testing, Section 1 Enamelled sheet steel
測試玻璃狀搪瓷器皿方法：第一部分 試驗試樣的制備， 第一節 瓷漆鋼板
23. IS 4943
Assessment of butt and fillet fusion welds in steel sheet, plate and pipe
薄鋼板，厚鋼板和鋼管末端和角融合焊縫評估
24. IS 5522
Stainless steel sheets and strips for utensils
器具不銹鋼板和鋼帶
25. IS 6240
Hot Rolled Steel Plate (up to 6 mm) Sheet and Strip for the Manufacture of Low Pressure Liquefiable Gas Cylinders
制造低壓液化氣體鋼瓶的熱軋厚鋼板（厚6mm），薄鋼板和鋼條
26. IS 6911
Stainless steel plate, sheet and strip
不銹厚鋼板，薄鋼板和鋼帶
27. IS 9442
Hot rolled steel plates, sheets and strips for manufacture of agricultural tillage discs
制造農業耕作圓盤的熱軋厚鋼板，薄鋼板和鋼帶
28. IS 9485
Cold-reduced and hot-rolled carbon steel sheet for porcelain enamelling
搪瓷的冷軋和熱軋?zhí)妓劁摪?span lang="EN-US">
29. IS 12093
Code of practice for laying and fixing of sloped roof coverings using plain and corrugated galvanized steel sheets
使用平整型或波紋型鍍鋅鋼板鋪設安裝斜坡屋頂實施規則
30. IS 15914
High Tensile Strength Flat Rolled Steel Plate (Up To 6 mm), Sheet and Strip for the Manufacture of Welded Gas Cylinder
制造焊接氣瓶的高張力平軋厚鋼板（厚達6mm），薄鋼板和鋼帶
31. IS 15961
Hot Dip Aluminium-Zinc Alloy Metallic Coated Steel Strip and Sheet (Plain)
熱浸鍍鋁鋅合金金屬涂層鋼帶和鋼板（平整型）
32. IS 15965
Pre-painted Aluminium Zinc Alloy Metallic Coated Steel Strip and Sheet (Plain)
預涂鋁鋅合金金屬涂層鋼帶和鋼板（平整型）
33. IS 15997
Low Nickel Austenitic Stainless Steel Sheet and Strip for Utensils and Kitchen Appliances – Specification
器具和廚房電器的低鎳奧氏體不銹鋼板和鋼帶-規格
34. IS/ISO 16160
Continuously Hot-Rolled Steel Sheet Products - Dimensional and Shape Tolerances
連續熱軋鋼板產品-尺寸和形狀公差
35. IS/ISO 16162
Continuously cold-rolled steel sheet products - Dimensional and shape tolerances
連續冷軋鋼板產品-尺寸和形狀公差
36. IS/ISO 16163
Continuously Hot-Dipped Coated Steel Sheet Products - Dimensional and Shape Tolerances
連續熱浸涂層鋼板產品-尺寸和形狀公差
| < 上頁 | 下頁 > |
|---|